Shuttering Plywood Manufacturers

Why Does a Shuttering Plywood Company Play a Pivotal Role

Construction requires plywood that can resist difficult weather conditions, such as shuttering plywood, which can bear high pressure, moisture, and repeated handling. But what matters a lot is the manufacturer when purchasing plywood. Choosing the right shuttering plywood company can help you pick the best product for your construction work. The reliability of a company depends on various factors. Let’s discuss these factors briefly.

1.     Chemical-Resistant Glue

A reputable manufacturer uses phenol-formaldehyde (PF) resin to bond wood layers instead of using cheap urea glue. It makes the plywood boiling water proof (BWP), so it does not peel apart or melt when exposed to wet cement or harsh weather conditions. True BWP plywood can resist 72 hours of continuous boiling water without causing the sheets to split open after one or two pours.

2.   Certified Quality Standards

Top companies test every batch of wood in laboratories that follow the IS 4990 standard set by the Bureau of Indian Standards (BIS), whereas unbranded makers often stamp fake marks without testing. This means the wood purchased from top companies must have a moisture content between 5% and 15%. However, if the company skips kiln drying, there is a high chance that the sheet will warp or shrink the moment it is exposed to outdoor weather.

3.   High Pressure and Density

Established brands prioritise heavy hydraulic presses at precise temperatures around 16 to 22 kg/cm² of pressure at temperatures around 140°C to 150°C to combine the layers. This removes the air pockets and creates a stable board that withstands moisture penetration. A standard 12 mm sheet from a good company weighs around 30 kg to 34 kg, whereas cheap company sheets weigh less.

4.   Thick Phenolic Resin Coatings

A top shuttering plywood company uses heat to fuse a phenolic resin-impregnated paper film onto both faces of the plywood. They use 120 to 180 GSM film coatings that don’t scratch off easily. This dense film blocks water absorption and prevents cement paste from sticking to wood pores. It allows the workers to strip the boards cleanly without damaging the concrete surface.

5.    Strong Internal Core

Leading manufacturers use high-density tropical hardwoods like eucalyptus, gurjan, or birch for their tight grain structure and high load-bearing strength, making their wood fibers tightly packed. They position full, single-piece veneers edge to edge inside every layer, ensuring a solid internal core with zero gaps inside.

Final Thought

Shuttering plywood has been rising in the construction industry due to its quality, strength, and durability. But it is important to check the quality of the glue used, whether the sheet is certified, the thickness of the coatings, and the strength of the internal core. All these factors are necessary to pick the right plywood for your construction work. It all comes down to choosing the best shuttering plywood company. Grassim Ritzy Ply, we are the leading manufacturer, supplier, and exporter of plywood. Our engineers are highly experienced and maintain quality and the highest satisfaction at every step.

FAQs

Shuttering plywood generally delivers 10 to 15 repetitions depending on its quality, coatings, and proper care.

Shuttering plywood often leaves a smooth, fair-faced concrete surface that often eliminates the need for thick wall plastering.

Yes, phenolic film coating on both sides allows you to flip the board, effectively doubling the usable concrete contact surfaces.

Regular plywood lacks the high-pressure and smooth phenolic film overlay needed to withstand hydrostatic concrete pressure.

You must apply before use, clean immediately after use, and paint any newly cut edges or nail holes to prevent water from soaking in and swelling the wood.